HSGQ Fiber Laser Marking Machine
Fiber laser means a laser that uses a rare-earth-doped glass fiber as a gain medium. A fiber laser can be developed on the basis of an optical fiber amplifier: Under the action of pump light, high power density can be easily formed in the fiber, resulting in a laser of the laser working substance.
The energy level "particle number reversal" can form a laser oscillation output when a positive feedback loop (constituting a resonant cavity) is appropriately added. Fiber laser marking machines use laser beams to mark permanent surfaces of various substances.
The effect of marking is to reveal the deep material through the evaporation of the surface material, or to "burn" the trace by the light energy to cause the chemical physical change of the surface material, or burn off some of the material through the light energy, showing the required etching. Patterns, text, bar codes, and other types of graphics.
| Item |
Portable Fiber Laser Marking Machine |
Pulse Width |
90ns-130ns |
| Laser Power |
20W, 30W, 50W, 100W |
Repeat Frequency |
20KHZ-200KHZ |
| Max Working Area |
70mm, 110mm, 150mm, 175mm, 200mm, 300mm |
Power Consumed |
<=1000W |
| Laser Wavelength |
1064nm |
Control Software |
Genuine EZCAD |
| Marking Speed |
0-7000mm/s |
Cooling |
Air Cooling |
| Monopulse Energy |
0.67 mj-1.5 mj |
Power Supply |
AC220V+/-10%, 50Hz/60Hz |
Q: What's the package?
A: We have 3 layers package: The outside is plywood case, which is fumigation-free packaging. In the middle is covered with thick sponge to protect the machine from shaking. Inside this is covered by thickening plastic bag for waterproof.
Q: Will the package damaged during transportation?
A: Our package is considerate all the damage factors and make it to be safe, and our shipping agent have full experienced in safe transportation.
Q: How to install and operate the machine?
A: Our engineer have installed and tested the machine before shipping. No parts need installed.
For running machine, we have menus and videos to show you for training. And we also will training you on line. Most of customers training to run the machine like this, very little customer come factory for training.
Q: What can I do if the machine goes wrong?
A: If confronted with such problems, please contact us ASAP and do not try to fix the machine by yourself or someone else. We will response within 24 hours as quickly as we can to solve it for you.
Q: Why should you buy from us not from other suppliers?
A: In business since 2006, holy laser has worked hard to produce stable, efficient and economic laser engraving, cutting and marking system. Now, we have 40 employess in R & D department. So we can provide OEM, non-standard custom.
Audited Supplier 
){kind=link}
){kind=link}